• 關於銘九
  • 產品介紹
  • 最新消息
  • 連絡我們
繁體中文 English
回到產品
模具鋼、熱處理鋼材系列刀具
4KEL/ 4刃長刃鎢鋼銑刀
產品編號刃徑刃長全長柄徑
D030-L060312606
D040-L060416606
D050-L060520606
D060-L075624756
D080-L075832758
D100-L100104010010
D120-L100124510012
D160-L150166415016
D200-L150207215020
公差

Unit:mm

Attnetion : In order to get better cutting surface and lengthen the life-time of the end mill, please use highaccuracy, high rigidity and dynamic equilibrium of holder.

  1. Befor using the end mill, please examine the end mill to lean towards and put ,when the precision of the leaning towards of mill exceeds 0.01mm. Please cut after correcting.
  2. It is better that end mill stretches our shorter from chuck, when the end mill stretches out longer, please adjust the rotational speed, feeding speed or cutting amount.
  3. Unusual vibrations or sound haappen when cutting, please adjust and ;ower the rotational speed of the main shaft one by one, feeding speed and cutting amount until improving the situation, or change the high-quality end mill.
  4. It is the best way to cool steel material by spraying or air in order to make TiAlN efficiently; we commend to adopt non-water cutting liquid to cool the stainless steel, titanium alloy or heat-resisting alloy liquid.
  5. Cutting will be influenced by work piece, machine and software; the above-mentioned data are only for reference, please improve feeding speed by 30%~50% up after cutting situation steadily.
  6. Use a machine tool with rigidity and rigid set-up, to machine stablt.
  7. When the revolutionspeed is not enough, reduce the revolution speed and table speed at the same ratio.
  8. Adjust the revolution speed and table speed, according to cutting conditions such as machining shape, rigidity of machine tool, over-hang and so on.
PAGETOP

銘九股份有限公司    TEL:+886-4-2320-8586 FAX:+886-4-2320-8579 http://www.accucut-tw.com © 2013. All Rights Reserved. Made in Taiwan