40460
No.90, sec. 2, Hwa Mei Str.,
Taichung, Taiwan.
Products
HOME / Products
-
ACCU CUT 4 Flute 45° Square End Mill
Product Details
- General Usage: Ideal for machining copper, alloys, cast iron, steels, and stainless steel (HRC < 50).
- Solid Carbide: Ultra-fine European carbide for exceptional hardness, wear resistance, and stability.
- AlTiCrN Coating: Advanced coating offering outstanding wear resistance and heat resistance.
- 45° Helix Design: Ensures smooth surface finish and precise machining for planar, step, and groove applications.
Product Specifications
Feature Details Diameter 1/8" - 1/2" Flute Length 5/32" - 5/4" Material Tungsten Carbide Coating AlTiCrN Flutes 4 Helix Angle 45° Buisness Product Specification
Item No. Flute (T) Diameter (D) Flute Length (H) Overall Length (L) Shank Diameter (d) I4KES-D0.79-L38.1 4 1/32" 3/32" 3/2" 1/8" I4KES-D1.59-L38.1 4 1/16" 3/16" 3/2" 1/8" I4KES-D2.38-L38.1 4 3/32" 3/8" 3/2" 1/8" I4KES-D3.175-L38.1 4 1/8" 3/8" 3/2" 1/8" I4KES-D3.175-L50.8 4 1/8" 5/16" 2" 1/8" I4KES-D3.97-L50.8 4 5/32" 1/2" 2" 3/16" I4KES-D4.76-L50.8 4 3/16" 15/32" 2" 3/16" I4KES-D6.35-L50.8 4 1/4" 5/8" 2" 1/4" I4KES-D7.935-L63.5 4 5/16" 25/32" 5/2" 5/16" I4KES-D9.525-L76.2 4 3/8" 15/16" 3" 3/8" I4KES-D9.525-L101.6 4 3/8" 15/16" 4" 3/8" Item No. Flute (T) Diameter (D) Flute Length (H) Overall Length (L) Shank Diameter (d) I4KES-D12.7-L76.2 4 1/2" 5/4" 3" 1/2" I4KES-D12.7-L101.6 4 1/2" 5/4" 4" 1/2" I4KES-D15.88-L101.6 4 5/8" 25/16" 4" 5/8" I4KES-D19.05-L101.6 4 3/4" 15/8" 4" 3/4" FAQ
What is a 4 flute end mill used for?
A 4 flute end mill is ideal for finishing cuts, slotting, and contouring harder materials like stainless steel.
What is the difference between 2 flute and 4 flute milling?
2 flute end mills are better for chip evacuation in softer materials, while 4 flute end mills are perfect for harder materials due to their smooth finish.
Can you plunge with a 4 flute end mill?
Yes, but it requires careful use due to reduced chip clearance compared to 2 flute end mills.
Can you drill with a 4 flute end mill?
It is not recommended for drilling as it does not evacuate chips like a drill bit. However, it can be used for light plunging.